"We love the challenge of a bore- compensated spacer or a pre-load."
- Chuck Eads, Master Reclassification Technician.

• Glass technology.
• High precision applications.
• 330 code bearings.
• Standard orders.
• Special custom orders.
• Printing press applications / 434 code bearings.
• Primarily at or below "Blue Book" value.
• We stock Stub Shafts for custom pound pulls and printing press bearings.

Taper Roller Bearings uses bearings manufactured by the Timken Company.

1. New bearings are manufactured at the factory to a minimum of Class #2 standards.
2. State-of-the-art computerized measuring equipment is used at Taper Roller Bearings to establish whether a bearing falls within the AFBMA boundary specifications of a Precision #3 bearing.
3. Our machines are calibrated annually and have .000003 (millionth) of an inch repeatability.
4. We coat each bearing with Mobilarma 245®, a preservative and rust inhibitor, then wrap each bearing in Protectowrap® to give it a superior shelf life.

Taper Roller Bearings removes "Timken" from the bearings and adds "TRB". We carry liability insurance and have a copy on file for your review.

For each and every re-classed bearing, the computer generates a printout that is then packaged with the product. We also keep a digital copy of each bearing classed. The printout shows the exact location and value for the total indicated runout.

Taper Roller Bearings, Inc. is not a subsidiary of The Timken Company or otherwise affiliated with The Timken Company,
and Taper Roller Bearings, Inc.'s products are not sponsored or approved by The Timken Company.